2015-D3 - Thermo-mechanical testing
2015-D3-1
JOYCE Richard, MCBURNEY Ian, GREGROY Brian - Transpower New Zealand Limited Wellington, New Zealand
2015-D3-2
Cigre WG B1.34: mechanical forces with large conductor cross section XLPE cables
KURATA Tatsuo - J-Power systems Corporation Osaka, Japan
BACCHINI Marco - Prysmian Milan, Italy
MAY Hans-Peter - nkt cables Cologne, Germany
KAUMANNS Johannes - LS Cable & System Gumi-si, Republic of Korea
GEHLIN Gunnar - Svenska Kraftnaet Stockkolm, Sweden
GREGORY Brian - Cable Consulting International Sevenoaks, Kent, UK
JOHNSON Dennis - Powereng. Lenexa, USA
SAMUEL Jourice - Nexans Calais, France
TARNOWSKI Janislaw - IREQ Varennes, Québec, Canada
VAN DEN THILLART Ron - Tennet Tilburg, The Netherlands
WALD Detlef - Eifelkabel Villmergen, Switzerland
PYE Caroline - Mott McDonald Brighton, Ireland
VILHELMSEN Morten - Energinet.dk Frederica, Denmark
REINOSO Ricardo - Red Eléctrica de España Madrid, Spain
2015-D3-4
Thermo-mechanical behavior of HV and EHV large conductor XLPE cables in duct-manhole systems
ECKROAD Steve, ZHAO Tiebin - EPRI Palo Alto, California, USA
GALLOWAY Stephen J., GREGORY Brian - Cable Consulting International Sevenoaks, Kent, UK
KING Stephen M. - Dassault Systemes UK Ltd. Warrington, Cheshire, UK
2015-D3-5
Measurement of thermomechanical properties of 400 kV 2500 mm2 cable
MOORHOUSE David - National Grid plc Warwick, UK
PILGRIM James A., HUNTER Jack, PALMER Neil - University of Southampton Southampton, UK
GREGORY Brian - Cable Consulting International Sevenoaks, Kent, UK
2015-D3-7
ROUILLARD Vincent - Victoria University Melbourne, Victoria, Australia
RAHMAN Naveed - Nexans Olex Tottenham, Victoria, Australia
2015-D3-8
Cable installation in vertical shaft
MAGNANI Francesco - Cable Installation Consultant Milan, Italy
BACCHINI Marco - Prysmian Power Link S.r.l Milan, Italy